Supercharged 400hp S50-engined wide-arch BMW M3 Coupe E36


’CHARGED 400HP BMW E36  M3 supercharged, wide-arch E36 M3


There is no doubt that the BMW E36 3 Series is one of the most popular BMW tuning platforms in existence. It’s easy to see why. The third generation Three –particularly the M3 variants – boast some of the best handling and steering available in an older BMW, which in turn makes them ideal driving machines, even in stock form. And while the U.S. market missed out on the 286hp engine that the Euro market cars were powered by, the S50 and S52 engines fitted to U.S.-spec M3s are engaging, revvy engines in the best tradition of iconic BMW inline-sixes. And if stock isn’t your thing, the E36 chassis can handle just about any modification you can choose to throw at it, from high-powered forced induction set-ups to large displacement Yankee V8s. Add in a plentiful aftermarket network with a seemingly endless number of ways to improve upon the E36 and the appeal is self-evident.

Britt Vail’s wide-body E36 M3 is a perfect example of what one can end up with if you have a little skill (or in this case, a lot) and a can-do mindset to building a car. Over the last seven or so years of ownership, Britt has continually upped the ante of his project M3. He started out with a set of larger BBS LM wheels, but at this point nothing is off the table. “I’ve doubled the power and possibly the grip as well,” says Britt. “Every time I get the feeling of selling the car I just take it out for a drive and that idea is gone instantly.”

Britt was exposed to cars and the tradition of hot-rodding them while growing up in Brighton, a small town just outside of Detroit, Michigan. Brighton is considered by many to be the spiritual birthplace of the American car industry. The first Ford was assembled a few blocks off Woodward and the town lays claim to the annual Woodward Dream Cruise, an event that attracts droves of car enthusiasts to take in the spectacle of over 30,000 cars cruising through the town’s main drag.

Being around the American muscle car culture celebrated on Woodward certainly had an influence on Britt. As a long-time car enthusiast he’s owned a wide variety of four and two-wheeled vehicles. Everything from American muscle by way of a ’1968 Pontiac GTO to an assortment of Hondas, Subarus and VWs, to name but a few, have passed through his hands. But while numerous cars have come and gone, his E36 M3 Coupé has earned a permanent place in the garage. Since acquiring it in 2011, the black BMW has evolved from a stock and original car to something far more extreme.

 

When he originally came across the BMW in 2011, Britt was actually stationed halfway round the world at Combat Outpost Sanchez in Eastern Afghanistan, serving as a communications specialist for the U.S. Air Force. To kill time when he wasn’t working, he was either hitting the gym or surfing the Internet. During one of those online sessions he spied a perfectly preserved 1995 M3. It was for sale in Fargo, North Dakota, about four-and-a-half hours away from his then-home in Minot, North Dakota. According to the online ad, the person who was selling it had stored it carefully in a heated garage and even claimed that the back seats of the car had never been sat in. Despite being unable to see the car in person before making the decision to purchase it, Britt reached out to the seller and expressed interest in it.

A few days later he wired a $500 deposit along with the agreement that he would pick up the car and finalise the transaction once he returned to the United States from his deployment a few months later. With the purchase of the M3 secured, Britt dedicated more of his spare time at the military outpost researching ways to extract more performance from the highly-acclaimed E36 M3 platform. He even ordered a few parts for it so there would be no wasted time when he finally got to work on it. Though the example he bought was a pampered, original car, he had no plans on keeping it that way. At the time he owned a Nissan 240SX project car, which he planned on selling as soon as the BMW was in his hands. “The original goal behind the build was to have a fast and fun street car that I could take to autocross events and road courses on the weekend,” he says of the work he was anticipating performing on the M3. “I know some people see the appeal of a BMW is just owning the name, but I look at it more as having a higher quality car to play with.”

 

The first upgrade that the BMW was treated to was a set of larger Linea Corse wheels and appropriate tyres. But that was a small step in what would become a much longer journey of transformation that would see the M3 evolve far past its original performance. Thanks to the fact that E36 M3s were being imported to the U.S. beginning in 1995 there are a plenty of ways to improve their performance.

The naturally aspirated approach can add power to the S50 engine with upgrades like hotter camshafts, free-flow exhausts and other bolt-ons but to get really big power from these engines forced induction is generally the path of least resistance – and big power was exactly what Britt was after.

Once he had settled on the method, a decision had to be made between supercharging or turbocharging. Britt elected to go with supercharging, which is easier on the engine as well as simpler to install than a turbo setup. Another reason for supercharging was the power delivery; “I decided to go with the supercharger kit over a turbo to have a better power range without suffering from lag,” he explains. “I ended up ordering the Stage 2 supercharger kit and full header-back exhaust from Active Autowerke.” The Florida-based company claims an increase from the stock S50’s 240hp to up to and even over 400hp, an amount that Britt figured would keep him happy for a while. Once the kit arrived on his porch in a stack of boxes he proceeded to install the setup himself in his garage. “The installation instructions were fairly well written and included pictures,” he notes. The conversion to forced induction centres, of course, around the HKS 8550 model centrifugal supercharger, complete with intercooler. The kit includes a recirculating blow-off valve, larger and better-flowing 44lb fuel injectors and a Walbro 255lph in-tank fuel pump to feed them. Britt didn’t stop with the supercharger kit, though, and also opted for an Active Autowerke header, track pipe and dual-tip “Signature” exhaust. With the exception of a thermostat that opens at a lower temperature, things have been kept stock in the cooling system, a setup that he says works just fine, even on the hottest of days. Britt also notes that another aspect of the M3 that is holding up surprisingly well is the stock clutch and gearbox. The only change to the gearbox was replacing the OEM lubricant with Royal Purple transmission fluid while on the driver’s end is a UUC short-shift kit for quicker, more precise shifts.

 

Long-term goals for Britt and his M3 include the possibility of entering the car in the challenging Pikes Peak International Hillclimb in Colorado, albeit with the car in a far more extreme state of tune than it’s currently in. With that goal in mind and knowing the BMW would need plenty of grip to tackle Pikes Peak, the M3’s exterior has been modified with a set of arch flares to accommodate the massive wheel and tyre setup that was planned for the car. “I’ve done all of the work so far, minus the bodywork,” says Britt, who was transferred a few years ago to Kirtland Air Force Base in the south west U.S. state of New Mexico. Paint and bodywork being the somewhat black art that it is, the M3 was handed over to Superior Customs in Albuquerque, New Mexico where a set of arch flares from DTM FiberWerkz were installed and painted body colour; the process of installing the flares wasn’t all that simple and required extensive reworking and fitting by the body shop in order for them to fit properly. A fibreglass vented bonnet from MAShaw replaced the stock item while the bottom of the already aggressive stock front bumper gained a deeper lip from Rieger; there are also blacked-out ECS Tuning kidney grilles and fog lights that have been tinted with yellow Lamin-X vinyl tint. Britt also went to the trouble of sourcing a set of Euro glass headlights, which hold up far better than the plastic U.S.-spec headlights. Towering over the trunk is an MAShaw E36 M3 Lightweight-style wing, giving the car a track-ready vibe while rounding off the exterior changes is a Fancywide lower rear diffuser.

 

With the arches considerably flared, Britt shopped around for the ideal wheels to fill them. The solution came via a set of Forgestar F14 wheels that measure 10×18” up front and a generous 11×18” at the rear, wrapped in sticky Yokohama AD08R rubber measuring 265 across up front with 295s at the back. The wheels sit on a stud conversion kit and behind those super-deep concave spokes are Wilwood six-piston calipers and 330mm two-piece discs up front, with four-piston calipers and StopTech slotted discs at the rear, along with Wilwood hoses all-round. With track days and weekend canyon carving in mind, Britt installed a set of KW V2 coilovers, allowing the optimal ride and handling to be dialled-in. Vorshlag camber plates allow the front camber to be adjusted easily and there are also Rogue Engineering rear shock mounts and rear camber arms.

 “I decided to go with the supercharger kit over a turbo to have a better power range without suffering from lag. I ended up ordering the Stage 2 supercharger kit and full header-back exhaust from Active Autowerke”

Considering the extreme statement that the exterior of Britt’s car makes, it’s no shock that the interior has been upgraded with track use in mind. The original Vader M3 seats that the BMW left the factory with were removed and sold on to make way for a pair of deeply-bolstered, one-piece Sparco Circuit II race buckets bolted in place with Brey-Krause seat mounts. There are also Sparco six-point harnesses for the driver and passenger, held in place with a Brey-Krause harness bar. Continuing the track-focused theme is a grippy, suede-upholstered Sparco R353 steering wheel; the wheel uses a flat bottom for more legroom and can be easily removed via a quick-release adapter that is welded to the M3’s steering column. One would think that the current extreme state of tune that Britt’s E36 M3 enjoys would be enough to satisfy the speed demon in him. The reality, though, is that for this enthusiast the envelope must always be pushed. To that end, Britt is plotting an LS1 V8 conversion to take the BMW to the next level of performance. It may offend the purists, but we can’t wait to see the next stage of evolution for this ongoing epic E36 build.


 

DATA FILE Supercharged BMW E36 M3 Coupe

ENGINE AND TRANSMISSION 3.0-litre straight-six S50B30US, Active Autowerke Stage 2 supercharger kit using an HKS 8550 centrifugal supercharger, intercooler, 44lb/ hr injectors, Walbro 255lph in-tank fuel pump, Active Autowerke exhaust manifold, track pipe and dual-tip Signature exhaust, Active Autowerke chip, uprated Mishimoto radiator with electric fan, E30 expansion tank, air con delete. ZF Type-C five-speed manual gearbox, UUC short-shift kit, stock clutch

CHASSIS 10×18” (front) and 11×18” (rear) Forgestar F14 wheels in anodised flat red with 265/35 (front) and 295/30 (rear) Yokohama Advan Neova AD08R tyres, KW V2 coilovers, Vorshlag camber plates (front), Dinan strut tower brace and anti-roll bars (front and rear), Rogue Engineering mounts (rear) and control arms (rear), X-brace, Wilwood six-piston calipers and 330mm two-piece discs (front), fourpiston calipers with StopTech slotted discs (rear), Wilwood hoses

EXTERIOR Cosmos black metallic, ECS Tuning black kidney grilles, Euro headlights with housings painted black, amber indicators, MAShaw fibreglass lightweight vented bonnet, bonnet pins, Lamin-X yellow fog light tints, Rieger front lip, DTM FiberWerkz arch flares, MAShaw E36 M3 Lightweight-style wing, Fancywide rear diffuser

INTERIOR Sparco Circuit II seats, Brey-Krause mounts, Sparco six-point harnesses, Brey-Krause harness bar, Sparco R353 suede steering wheel, quickrelease weld-on adaptor, steering column gauge mount for AEM wideband and boost gauges, fire extinguisher on centre console

THANKS Special thanks to my wife, Lauren, for putting up with all the time and money I spend on what she likes to call “the mistress”

“Britt Vail’s wide-body E36 M3 is a perfect example of what one can end up with if you have a little skill (or in this case, a lot) and a can-do mindset to building a car”

 

Wide arches give this M3 some serious stance AEM boost Gauge. Brey-Krause harness bar. Sparco Circuit II bucket seats. This E36 is seriously menacing. HKS 8550 supercharger makes 400hp Dinan strut brace. Forgestar 18s measure 10” wide up front and 11” at the rear.

How useful was this post?

Click on a star to rate it!

Average rating 4.1 / 5. Vote count: 14

No votes so far! Be the first to rate this post.

- Advertisment -

RECOMMEND BLOGS